Rick Simpson Oil (RSO) is a high potency cannabis extract with high levels of THC, along with other cannabinoids. Many researches have demonstrated its …
He leaves the weed and alcohol to mix Way to long I only mix it for 5 minutes I then strain it and let the green chlorophyll disappear in sunlight This only takes a hour or two in strong sunlight Then I cook it down
I’ve never seen the freeze method. I was thinking you would loose a lot from not carbing anything but shit, that stuff is beautiful. Can’t wait to try this method. Thank you very much!
I just put it on my finger and rub it on my gums, but that’s only with rso that tastes good, the OG kush has an amazing taste to it so I don’t mind, but I also have member berry rso and it’s bitter. It kicks in very fast like smoking and it lasts a lot longer than normal. Nice to know how to make it, I’ll probably continue to buy it from the dispo when it’s on sale, I got some today for 25$ a gram. I’m going back tomorrow to buy a sativa and at least one more og Kush. Been nice being able to get high fast without having to smoke a lot of weed or wait an hour for an edible to kick in. 50 mg edibles aren’t even strong and that’s half a chocolate bar in Colorado xD
The reason things are frozen is to assist getting a clean break off of trichomes from the tops of the leaves (like when making bubble hash with ice). If they break off versus having to be rubbed off with a solvent (the alcohol), they presumably would be more completely separated from the plant material. So, you should freeze the weed and the alcohol and combine them in this frozen state just before mixing the cold solvent with frozen weed. I can't imagine that freezing after you've been mashing and stirring the solvent and plant material helps, but that's just a guess. It seems like after the solvent is on the weed, there's no more chance for a fragile trichome to even exist in that environment. They would probably be stumpy nubs on top of the leaves that only stirring in a solvent would get them to rub off. Has anyone ever put it under the microscope to check?
I used about 18grams of shake. About a quarter of a water bottle of 99% Isopropyl A strainer A coffee filter 2 big mason jars
I froze both the weed and Isopropyl for 12 hours in separate jars.
Blended up the buds to fine pieces about the size of salt.
Added the isopropyl to it for about 15 minutes
Mixed it together and strained as much plant material through the strainer and coffee filter as I could.
I still had some plant matter left over in the 2 cups I was using to repeat the straining process.
I boiled a large pot of water and added the strained isopropyl/cannabis container into the water.
It looked like everything was going according to plan, the isopropyl was evaporating out of the container but after about an hour of sitting in the boiling water the isopropyl seemed to have all evaporated but I was left with what looked like about 3 grams of just greenish powder with a slight brownish tint to it.
So I never got the wax consistency, where did I go wrong? It’s seems like I just have a jar of 3grams of heavily concentrated kief. Can I salvage what I have or did I fuck it all up?
This method I used was composed of about 4-5 YouTube videos but they mostly said the same thing freeze the 91% Isopropyl or better, combine it with the grounded up buds, strain it, cook in double boiler fashion, evaporate the isopropyl and boom, RSO.
Hallo, why would you not just infuse in coconut oil? Thats how it was done in the past way before some RSO…Why solvent? Just curious. And thank you so much for sharing, really great video.
Grain alcohol is food grade…its safe to use and even if there's small amount its safe. Youre using a rice cooker and boiling it in the house. Please don't take advice from this guy. He has no clue what he's doing.
One big question I have unanswered is does the herb not have to be de-carbed in the oven first? I did that with the butter I made recently and it was insanely potent, but because you didn’t list that step here I didn’t do it with the RSO I’m making. So what’s the deal with that? I’m hoping a good bit of the potency wasn’t lost in not doing that step
QUESTION – does the weed have to be decarboxylated first? if not then why? so many other vids of people putting weed in oven first in varying times and temperatures
5:15 at this stage Rick Simpson says add a little water. As it boils off at a higher temp than the alcohol you can be sure there is no residual alcohol left once the water has boiled off. Also if you just put straight RSO in a cap it won't be as effective as it is when mixed with some Coco oil. 100mg RSO in a cap won't do as much as 100mg RSO mixed with 200mg Coco oil in a capsule, Organic virgin cold pressed oil is the way to go 👌
I use a distiller & ALWAYS distill OUTSIDE on my deck. I use a lot more ETOH. Some use naphthalene which consists of a benzene ring, 6 carbon ring, aromatic ring which causes cancer thus my use of pure grain. My pure grain has a liquor seal; one can drink it. All ETOH can or could be bad for one's health. My procedure: I soak whatever in a lot of ETOH in freezer. Mash up whatever a lot, put in freezer for about an hour, strain with a paint mesh. It has elastic around it & can be used on a large container. Reserved liquid can be strained again with cheesecloth or coffee filter. I end up with about 2 quarts of mixture. Pour into distiller…takes a couple of hours….but keep an eye on the last 1/4….it distills quickly. Then I pour liquid in a small metal cup (birdcage cup) & put on a hot plate set on warm. Put 10 drops of H2O into this cap with mix. Supposedly, it should be ready when no more bubbling….if not, keep on hotplate until desired consistency. I put into tiny bottles/vials with caps. BUT I allow it to sit out to have all the ETOH evaporate for a couple of days…then screw on caps & put in 'fridge.
I decided to buy some trim/shake to make my oil this time. I'm not to sure what they are putting into it ,because its significantly cheaper. I noticed when I press it out it's very sticky….. is this an indicator of high resin? Or just more chlorophyll?
im kinda looking for some advice from anyone that really knows RSO well… i made a batch and it effects my breathing … ( this particular batch..) I take the RSO in a pill, the RSO is made from 99% ISO very finely filtered. 4 times filtered … i cook that down and constantly stir … i take it in a 000 pill capsule.. normally i can fill it about a quarter full of a pill. when i first started out i would get sick from that amount … then then became my average dose … now this new batch gives me odd symptoms… i can only take a rice grain sized amount. but it gives me difficulty breathing… i get a panic attack because of the difficulty… it seems like i cant breath through my nose even if i use a methonal inhaler, then it becomes difficult to breath through the mouth.. i use an inhaler for that… i also will take some nasal spray and none seem to help … however it does help for my breathing when i dont take the THC pill. the other day i took about 1/5th of a pill full and i got pretty sick i thought i was going to die … this batch was made about a year and a half or two years ago. and ive stored it in 5ml plastic suringes. sometimes ive seen some bubbles at the end cap when i open them for the first time….. my question is, is there any danger to this method using 99%iso … because sometimes when i dose too high i really feel weird like i will die .. and my blood pressure skyrockets the other day my pulse was 138 and took about an hour to drop. during that time i could barely breath and only slowly breath… I had wondered if i took the batch off the cooker too soon… but can that be dangerous? btw when i say i pulled it off too early it was sludgy not runny like in this video when he mentions that.
In Canada cannabis is legal. Making oil like this is still illegal FYI and also dangerous as fuck. Making ice water hash with bubble bags and no solvents is safe and legal…done mould free of course.
This so much misinformation. If you use isopropyl alcohol or naphtha you have to boil all of it out, You used grain alcohol which is basically vodka so you do not need to get every last drop evaporated. It’s ok to leave a bit in, it’s not enough to get you drunk and it will keep the oil from getting too hard to handle. Second point, there’s no reason to freeze the alcohol unless you are making shatter, it’s an unnecessary step, for RSO you need all that plant material in the final product and freezing the alcohol prevents the full plant extraction as it only binds to the cannabinoids.
He leaves the weed and alcohol to mix Way to long
I only mix it for 5 minutes
I then strain it and let the green chlorophyll disappear in sunlight
This only takes a hour or two in strong sunlight
Then I cook it down
why freezing??
up to the point of getting the product out of a deeeeeep jar it seems clever…Why do you freeze (cool alcohol)??
I’ve never seen the freeze method. I was thinking you would loose a lot from not carbing anything but shit, that stuff is beautiful. Can’t wait to try this method. Thank you very much!
To test if there's still alcohol in the RSO, take a bit on the end of a paperclip and hold it over a flame. If it sparks you must keep cooking it. 🔥
Nice vid,but I’m not looking forward to the oil,how do u lower thc before smoking please.
Use Naptha and filter it good for gold oil
I just put it on my finger and rub it on my gums, but that’s only with rso that tastes good, the OG kush has an amazing taste to it so I don’t mind, but I also have member berry rso and it’s bitter. It kicks in very fast like smoking and it lasts a lot longer than normal. Nice to know how to make it, I’ll probably continue to buy it from the dispo when it’s on sale, I got some today for 25$ a gram. I’m going back tomorrow to buy a sativa and at least one more og Kush. Been nice being able to get high fast without having to smoke a lot of weed or wait an hour for an edible to kick in. 50 mg edibles aren’t even strong and that’s half a chocolate bar in Colorado xD
why not decarboxylate the flower?
I wonder why the RSO method does use carboxylation ?
Maybe to preserve the medical property of flower??
Well i didnt get all the alcohol out wtf man all that shit down the drain
you foYou forgot to DECARBOXYLATE your cannabis!!!
The reason things are frozen is to assist getting a clean break off of trichomes from the tops of the leaves (like when making bubble hash with ice). If they break off versus having to be rubbed off with a solvent (the alcohol), they presumably would be more completely separated from the plant material. So, you should freeze the weed and the alcohol and combine them in this frozen state just before mixing the cold solvent with frozen weed. I can't imagine that freezing after you've been mashing and stirring the solvent and plant material helps, but that's just a guess. It seems like after the solvent is on the weed, there's no more chance for a fragile trichome to even exist in that environment. They would probably be stumpy nubs on top of the leaves that only stirring in a solvent would get them to rub off. Has anyone ever put it under the microscope to check?
Alternative title: How to turn a shit load of high quality weed into a total mess in the bottom of a mason jar
You need a better mic and better room to record in every s you say is going ham af
Making RSO for the first time.
I used about 18grams of shake.
About a quarter of a water bottle of 99% Isopropyl
A strainer
A coffee filter
2 big mason jars
I froze both the weed and Isopropyl for 12 hours in separate jars.
Blended up the buds to fine pieces about the size of salt.
Added the isopropyl to it for about 15 minutes
Mixed it together and strained as much plant material through the strainer and coffee filter as I could.
I still had some plant matter left over in the 2 cups I was using to repeat the straining process.
I boiled a large pot of water and added the strained isopropyl/cannabis container into the water.
It looked like everything was going according to plan, the isopropyl was evaporating out of the container but after about an hour of sitting in the boiling water the isopropyl seemed to have all evaporated but I was left with what looked like about 3 grams of just greenish powder with a slight brownish tint to it.
So I never got the wax consistency, where did I go wrong? It’s seems like I just have a jar of 3grams of heavily concentrated kief. Can I salvage what I have or did I fuck it all up?
This method I used was composed of about 4-5 YouTube videos but they mostly said the same thing freeze the 91% Isopropyl or better, combine it with the grounded up buds, strain it, cook in double boiler fashion, evaporate the isopropyl and boom, RSO.
Hallo, why would you not just infuse in coconut oil? Thats how it was done in the past way before some RSO…Why solvent? Just curious. And thank you so much for sharing, really great video.
Grain alcohol is food grade…its safe to use and even if there's small amount its safe. Youre using a rice cooker and boiling it in the house. Please don't take advice from this guy. He has no clue what he's doing.
Excellent how to, thanks! A paper coffee filter works great, too
That's not a wide mouth Mason jar
French Coffee press works fantastic!
One big question I have unanswered is does the herb not have to be de-carbed in the oven first? I did that with the butter I made recently and it was insanely potent, but because you didn’t list that step here I didn’t do it with the RSO I’m making. So what’s the deal with that? I’m hoping a good bit of the potency wasn’t lost in not doing that step
Could you please make comments under mine, those who have used this cure and gotten healing effect from this cure ?
omg buy a pop filter
Bro imma be real here.
This is a long overdue and well done tutorial.
But still, someone just starting out with RSO who only casually consumes THC would get fxxked up off that capsule at the end lmao
Best to start with a grain of rice amount, especially if this produces RSO more potent than premade stuff from legal shops.
Can we smoke it? Or am I just talking crazy
Thank you
sounds like brown dirt warrior.
This is like Patrick Bateman narrating how he makes RSO
QUESTION – does the weed have to be decarboxylated first? if not then why? so many other vids of people putting weed in oven first in varying times and temperatures
5:15 at this stage Rick Simpson says add a little water. As it boils off at a higher temp than the alcohol you can be sure there is no residual alcohol left once the water has boiled off. Also if you just put straight RSO in a cap it won't be as effective as it is when mixed with some Coco oil. 100mg RSO in a cap won't do as much as 100mg RSO mixed with 200mg Coco oil in a capsule, Organic virgin cold pressed oil is the way to go 👌
Hello is it possible to use metal pot to break down cannabinoids with alcohol?
it's a fucking RICE COOKER
I use a distiller & ALWAYS distill OUTSIDE on my deck. I use a lot more ETOH. Some use naphthalene which consists of a benzene ring, 6 carbon ring, aromatic ring which causes cancer thus my use of pure grain. My pure grain has a liquor seal; one can drink it. All ETOH can or could be bad for one's health. My procedure: I soak whatever in a lot of ETOH in freezer. Mash up whatever a lot, put in freezer for about an hour, strain with a paint mesh. It has elastic around it & can be used on a large container. Reserved liquid can be strained again with cheesecloth or coffee filter. I end up with about 2 quarts of mixture. Pour into distiller…takes a couple of hours….but keep an eye on the last 1/4….it distills quickly. Then I pour liquid in a small metal cup (birdcage cup) & put on a hot plate set on warm. Put 10 drops of H2O into this cap with mix. Supposedly, it should be ready when no more bubbling….if not, keep on hotplate until desired consistency. I put into tiny bottles/vials with caps. BUT I allow it to sit out to have all the ETOH evaporate for a couple of days…then screw on caps & put in 'fridge.
Did you decarb the weed first?
why should the alcohol be frozen before using?
That was sweet! I make it but can only get 190 grain #goodvibes
I decided to buy some trim/shake to make my oil this time. I'm not to sure what they are putting into it ,because its significantly cheaper.
I noticed when I press it out it's very sticky….. is this an indicator of high resin? Or just more chlorophyll?
im kinda looking for some advice from anyone that really knows RSO well…
i made a batch and it effects my breathing … ( this particular batch..) I take the RSO in a pill, the RSO is made from 99% ISO very finely filtered. 4 times filtered … i cook that down and constantly stir … i take it in a 000 pill capsule.. normally i can fill it about a quarter full of a pill. when i first started out i would get sick from that amount … then then became my average dose … now this new batch gives me odd symptoms… i can only take a rice grain sized amount. but it gives me difficulty breathing… i get a panic attack because of the difficulty… it seems like i cant breath through my nose even if i use a methonal inhaler, then it becomes difficult to breath through the mouth.. i use an inhaler for that… i also will take some nasal spray and none seem to help … however it does help for my breathing when i dont take the THC pill.
the other day i took about 1/5th of a pill full and i got pretty sick i thought i was going to die … this batch was made about a year and a half or two years ago. and ive stored it in 5ml plastic suringes. sometimes ive seen some bubbles at the end cap when i open them for the first time….. my question is, is there any danger to this method using 99%iso … because sometimes when i dose too high i really feel weird like i will die .. and my blood pressure skyrockets the other day my pulse was 138 and took about an hour to drop. during that time i could barely breath and only slowly breath… I had wondered if i took the batch off the cooker too soon… but can that be dangerous? btw when i say i pulled it off too early it was sludgy not runny like in this video when he mentions that.
How much bud should be used for a great mid size batch?
could i use a 190 proof alcohol if i can’t find a 200 proof one ?
In Canada cannabis is legal. Making oil like this is still illegal FYI and also dangerous as fuck. Making ice water hash with bubble bags and no solvents is safe and legal…done mould free of course.
This so much misinformation. If you use isopropyl alcohol or naphtha you have to boil all of it out, You used grain alcohol which is basically vodka so you do not need to get every last drop evaporated. It’s ok to leave a bit in, it’s not enough to get you drunk and it will keep the oil from getting too hard to handle. Second point, there’s no reason to freeze the alcohol unless you are making shatter, it’s an unnecessary step, for RSO you need all that plant material in the final product and freezing the alcohol prevents the full plant extraction as it only binds to the cannabinoids.
Isnt true RSO made with the nugs and leaves from the plant and not just the nugs (as in the video)?
What music is that it sounds great to listen to when high
play at 1.25 speed to make him sound normal